Micropox Microcement Fine 2nd Coat Solid

IT'S NOT MICROCEMENT, IT'S 𝐌𝐈𝐂𝐑𝐎𝐏𝐎𝐗®

Discover the evolution in coatings with Micropox! 💫 

🌈 Variety of Colors, A World of Possibilities
Micropox offers a wide and vibrant color palette, allowing you to personalize your floors and walls with a unique style. From neutral tones to bold colors, you'll find the perfect combination that suits your taste and interior design.

💧 Micropox Floors: Resistance and Durability
Micropox floors are not only visually appealing but also offer exceptional resistance. Ideal for high-traffic areas, enjoy a durable floor that stays impeccable over time!

This listing is for Micropox Fine Part A & Part B with pigment for 2nd coat Solid

Micropox fine is part of the 3 systems for Micropox and its always applied with 2 coats

YIELD: 500g per m2

Part A - 9kg, Part B - 850g - COMBINED 9.85kg =18m2

SYSTEM 1 Wall's and floors standard system without mesh

• Microtac NP - 1 Coat
• Medium - 1 Coat
• Fine - 2 Coat's
• Pavipol M100 or Pavipol - 1 or 2 coats

SYSTEM 2 - Wall standard system with mesh

• Microtac AC
• Base - Used with or without mesh 1 or 2 coats
• Medium - 1 Coat
• Fine - 2 Coat's
• Pavipol M100 or Pavipol - 1 or 2 coats
  

SYSTEM 3 - Walls and floors  for moisture level 4%-10% with mesh

• Base BH - Used with or without mesh 1 or 2 coats
• Medium - 1 Coat
• Fine - 2 Coat's
• Pavipol M100 or Pavipol - 1 or 2 coats
  

APPLICATION FOR FINE

Prepare the mixture of the 2 components A+B, pouring the contents of part B into the container of part A. Shake and mix with a low speed drill until the mixture is completely homogeneous.

IMPORTANT : If using on a wall application you need to purchase TIX which is a binder to mix into medium and fine products, failure to mix in TIX will result in sagging of the product.

For those considering purchasing Micropox Microcement, we highly recommend attending our training course, which provides in-depth instruction on the full application process. This ensures the best possible results and helps you understand the correct techniques for a professional finish. While the product is available for purchase, we cannot be held responsible for errors made by untrained DIY enthusiasts. Ultimately, it is up to the individual to decide, but proper training is strongly advised to achieve a high-quality, long-lasting application.

POT LIFE:

15°C 80 min, 25°C 60 min, 30°C  30 mi

Determination of surface hardness, UNE-EN 13892-6: 171 N/mm2