Micropox Base BH

Easy to use and apply. Excellent adhesion on concrete, tiles, resinous coatings and damp substrates. High wear resistance.

Application on floors in shops, flats, offices and showrooms.

Binding and levelling coat for concrete surfaces.

Primer for resin coatings and floors in the presence of damp substrates.

Vapour barrier on concrete, brick and/or stone walls.

Stucco for sealing cracks and fissures.

Primer for slab coatings.

APPLICATION

Can be used with or without mesh

Tri-component product: Join component A (epoxy resin) and component B (hardner) together first, mixing with a whisk at low speed for about 2 minutes.

Then in a separate container add component C (Special Cement) and mix with recommended water which is 15% of the overall weight of component A, B and C, once mixed you than add this to Component A and B.

Apply with a suitable trowel.

YIELD : 500g/m² for each coat.

If using mesh you need 2 coats = 1kg per m2 for 2 coats

Before proceeding with the coating, wait 24 hours (at 25 °C and 50 % relative humidity), check with hygrometer is completely dry. In the case of results indicating the presence of moisture, apply additional coats of Micropox Base BH, until completely dry.