Micropox Microcement Fine 1st Coat Solid

£200.00 GBP

Sale Sold out

Taxes included. Shipping calculated at checkout.

Quantity

This listing is for Micropox Microcement Fine Part A & Part B with pigment for 1st coat Solid Colour

Please choose your chosen shade from the colour swatches available, The first coat of Fine always has more pigment in than the 2nd coat.

Micropox fine is part of the 3 systems for Micropox and its always applied with 2 coats

YIELD: 500g per m2

Part A - 9kg, Part B - 850g - Yield for combined 9.85kg = 18m2

SYSTEM 1 Wall's and floors standard system without mesh

Microtac NP - 1 Coat
Medium - 1 Coat
Fine - 2 Coat's
Pavipol M100 or Pavipol - 1 or 2 coats

SYSTEM 2 - Wall standard system with mesh

Microtac AC
Base - Used with or without mesh 1 or 2 coats
Medium - 1 Coat
Fine - 2 Coat's
Pavipol M100 or Pavipol - 1 or 2 coats

SYSTEM 3 - Walls and floors with mesh (also for moisture level 4%-10%)

Base BH - Used with or without mesh 1 or 2 coats
Medium - 1 Coat
Fine - 2 Coat's
Pavipol M100 or Pavipol - 1 or 2 coats

APPLICATION FOR FINE

Prepare the mixture of the 2 components A+B, pouring the contents of part B into the container of part A. Shake and mix with a low speed drill until the mixture is completely homogeneous.

Before applying the fine, make sure you are happy and you don’t have any imperfections/straight lines, if you do sand back and then hoover and wipe with dry cloth.

Apply the fine, scrape off the excess

Finish off with half moon pattern

Drying time depends on substrate, humidity, temperature-normally 6-12 hours

For vertical application add TIX additive up to 1% by weight.

SAND with 120grit, followed by 180grit

IMPORTANT : If using on a wall application you need to purchase TIX which is a binder to mix into medium and fine products, failure to mix in TIX will result in sagging of the product.

For those considering purchasing Micropox Microcement, we highly recommend attending our training course, which provides in-depth instruction on the full application process. This ensures the best possible results and helps you understand the correct techniques for a professional finish. While the product is available for purchase, we cannot be held responsible for errors made by untrained DIY enthusiasts. Ultimately, it is up to the individual to decide, but proper training is strongly advised to achieve a high-quality, long-lasting application.

POT LIFE:

15°C 80 min, 25°C 60 min, 30°C 30 mi

Determination of surface hardness, UNE-EN 13892-6: 171 N/mm2

View full details